X10 PRO XPR-W Duplex Outlet - Both outlets Switched - Factory Fresh

Description

CLICK HERE FOR EASY, ONE STOP SHOPPING IN MY EBAY STORE: BIG JOHNS PLACE
X10 PRO XPR-W SWITCHED DUPLEX OUTLET
BOTH OUTLETS SWITCHED
Practical X10 Pro Duplex Receptacle Module
is designed to control common household appliances that simply turn on or off, such as portable fans, electric decorations, radios, tools and more.  Also works with plug-in fluorescent and CFL lights.
Control when heavy duty appliances can operate.
When you think of home automation, it brings up impressions of controlling the electronics around you. That's what X10 controllers and the X10 Pro Duplex Receptacle Module can do for you.
Control heavy duty appliances, such as hot tubs, air conditioners, pumps and electric dryers
Both outlets are set to same X10 address and are controlled together.
Has switched-leg wire for hardwired external loads or down-line non-X10 receptacles.
Responds to ON/OFF and ALL UNITS OFF commands. Does not respond to ALL ON or DIM commands.
120VAC
20A  2400W
Minimum Load = 40W (Lamps/Loads rated below 40W may flicker and/or operate erratically)
White ONLY
UL listed
Dual replacement outlets with X10 compatibility! Both outlet functions like X10 appliance modules (set to the same address) to control electronics, fans, electric decorations and more.
This receptacle module offers remote control of various appliances and can be used in place of plug-in appliance modules for a more professional look. Both outlets are controlled, but are set to the same X10 address.
The XPR, 20A Duplex Receptacle is used as a Remote Load Switching Module, which responds to X10 ON/OFF Commands from an X10 Controller. Loads may be plugged into either one of the top/bottom receptacles and/or hard-wired from the Blue Switched Leg Wire to external loads or down-line NON-X10 receptacles.
Note: LOCAL CONTROL; The XPR Module can "Sense" if any load is plugged into it. When the load on/off switch is turned off then On, the XPR turns ON. Total load (both outlets and the leg wired combined) must not exceed 20A.
You should have the following to remotely control this module:
An
X10 PLUG IN CONTROLLER OR TIMER
or ActiveHome PC interface
OR
An
X10 WIRELESS REMOTE OR MOTION SENSOR
along with a
TM751 TRANSCEIVER
or ActiveHome PC interface or X10 security base station
CLICK HERE TO SEE MORE X10 DEVICES
DON'T SEE WHAT YOU WANT? NEED LARGER QUANTITIES? Contact me with your zip code and email address with your requirements
IF YOU BUY ITEMS FROM MULTIPLE LISTINGS, DO NOT MAKE SEPARATE PAYMENTS. THIS CREATES SEPARATE SALES RECORDS AND INVOICES AND WILL DELAY PROCESSING AND SHIPMENT OF YOUR ORDERS . I CANNOT COMBINE ORDERS FOR SHIPPING DISCOUNTS (IF AVAILABLE) ONCE YOU MAKE ANY SEPARATE PAYMENTS
IF YOU HAVE TROUBLE WITH SOME OF YOUR X10 MODULES AND DEVICES NOT WORKING CLICK HERE AND SEE IF A PHASE COUPLER/SIGNAL BRIDGE CAN HELP!
Check out my
other items
!
Be sure to add me to your
favorites list
!
Sign up for my email newsletters
by adding my eBay Store to your Favorites
Visit My eBay Store: Big John's Place
IF YOU HAVE TROUBLE WITH SOME OF YOUR X10 MODULES AND DEVICES NOT WORKING CLICK HERE AND SEE IF A PHASE COUPLER/SIGNAL BRIDGE CAN HELP!