WiFi dongle for air conditioner Midea Neoclima Electrolux AC for Home Assistant

Description

WiFi module for air conditioners of the Midea, Idea, Neoclima, Electrolux, Beko families (possibly also of other brands). Model SLWF-01pro (v.1.0)
Such a module will work with smart home systems based on Home Assistant, Domoticz, OpenHub.
Here is the ESPHOME component -https://esphome.io/components/climate/midea_ac.html
Promo video
:
https://www.youtube.com/watch?v=X1kTiyutP1E
Description:
The WiFi module for air conditioners SLWF-01pro is convenient and easy to use. Also, this module is very functional and versatile. Here are some reasons why you should buy this Wi-Fi module:
Integration with Home Assistant is fully automated (Autodiscovery), which simplifies the work with the device
Compact design, suitable for any conditioners (brands Midea, Idea, Neoclima, Electrolux, Beko)
Price: Most modules from other manufacturers usually cost around 800 UAH and do not allow their device to integrate "seamlessly" into smart home systems, but only through their own applications. With this module, you will be able to bypass all such restrictions and conveniently install it into your air conditioner.
Alternative choice of chips.
- A module without expansion and
- A module with expansion slot, ie you will be able to connect other sensors (lighting, sound, motion, temperature etc) to the module without soldering and get the data to your Home Assistant systems (see photos with 4 additional sensors)
Designed and assembled in Ukraine, factory made soldering;
A lot of happy customers with my product/service
Features:
Name: WiFi module for air conditioners
Compatibility with air conditioners of the following brands
- Midea
- Idea
- Neoclima
- Electrolux
- Beko
- Possible support for other brands (if produced at Midea Inc plants)
Smart home systems: based on HomeAssistant, etc.
Protocol: Wi-Fi
Two different chip options available:
- with extension pins . Ability to connect any sensors without soldering (output GPIO ESP8266 - ADC (for analog sensors), GPIO4 and GPIO5)
- without extension pins (SENT BY DEFAULT)
Compatibility with sensors (all available):
- lighting TEMT6000
- movement HC-SR501
- sound
- temperature ds18b20
- + connectors for such sensors
Setup instructions:
Insert the USB port of the air conditioner
Wait for the AC-wifi network to appear
Connect to it with the password slwf01pro
Go from the browser to the address 192.168.4.1
In the menu, select the home WiFi network
Enter the password and connect.
Important Notice!
* Connecting additional sensors requires you downloading the suitable firmware for your sensors.
** When using the "extended" version with extension pins and with active additional sensors, it is required that the WiFi reception in the room where the air conditioner and the module are installed is as high as possible.