EZ-FLO FEREZCBV100 1" slip x slip main line connection New Model

Description

1" slip x 1" slip Ez-Flo Main line New Model connector
By far the most popular connection type is the standard slip coupling connection.  This Standard Slip Coupling Connector is for 1" PVC and is a socket x socket connection for gluing into PVC pipe.
Standard Coupling Connectors are manufactured from Schedule 40 PVC with 1/4" nylon barbed tubing connections.   Standard Coupling Connections are used to connect the EZ-FLO system to the irrigation flow line before or after the valve with the 1/4" flexible tubing provided with every EZ-FLO system.  These connectors are principally used in new installations or in retrofits where there is adequate room to flex the irrigation pipe.
EZ-FLO Systems are Easy to Install and Easy to Use
EZ-FLO Systems can be installed in minutes. We recommend that they be installed in an underground valve box but they can also be hidden under decorative rocks or housed in  above ground structures when necessary. The only requirement is that they be installed after an approved backflow prevention device as determined by local plumbing
EZ-FLO main line systems are installed after the backflow prevention device and normally before the irrigation zone valves to allow the unit to feed all irrigation zones. A typical installation is shown here: 
In this configuration, when an irrigation zone valve is turned on, the EZ-FLO fertigation unit automatically adjusts to pressure and flow and precisely meters out the appropriate fertilizer based on the water volume flowing into that zone.