-40%
BCD Clock Kit Blue LED's DIY Binary Assembly School Project Soldering Time
BCD Clock Kit Blue LED's DIY Binary Assembly School Project Soldering Time
BCD Clock Kit Blue LED's DIY Binary Assembly School Project Soldering Time
BCD Clock Kit Blue LED's DIY Binary Assembly School Project Soldering Time

BCD Clock Kit Blue LED's DIY Binary Assembly School Project Soldering Time

$ 13.7

Availability: 49 in stock
  • MPN: KBC00100
  • Model: KBC00100-B
  • All returns accepted: Returns Accepted
  • Brand: Jerry's Kit
  • Type: Clock
  • Condition: New
  • Item must be returned within: 30 Days
  • Return shipping will be paid by: Buyer
  • Country of Manufacture: United States
  • Restocking Fee: No
  • Refund will be given as: Money back or replacement (buyer's choice)

    Description

    Click to enlarge
    Blue LED Big Bang Geek Clock Kit
    From
    Jerry's Electronics
    DIY kit features:
    Easy to assemble kit
    Through-hole components
    12 or 24 hour operation
    Small 3.4" x 2.5" footprint
    9 vac wall transformer included
    On board brightness control
    Hour and minute time set switches
    With blue LED's
    Includes standard 6-pin programming jack
    Click to enlarge
    Warning:
    if you are unable to read this clock you may NOT be a geek.
    Note: the parts picture shows red LED's, you will get blue LED's with this kit.
    A neat little BCD clock kit, displays time HH:MM:SS in BCD format (binary coded decimal). It's simple design makes it fun to assemble and customize to your taste. Time set, brightness controls and even LED's can be mounted from either side of the board to allow flexibility in your enclosure design. 12 or 24 hour time selection using a jumper wire. The kit comes with 5mm LED's but you could use 3mm LED's, remotely wire the LED's or mix different color LED's of your own.
    This clock keeps time from the power line frequency 60hz, if you plan on using the clock with 50hz power line frequency you will need to change the program code.The clocks micro comes pre-programed so once the kit is assembled you can immediately use the clock. Comes with standard 6-pin programming jack for direct hookup to the Atmel ATAVRISP2 in circuit programmer. The Assembly Language code is available on the Jerry's Electronics website, you can modify the code to your liking or just trace the code to help learn Assembly. Assembly Language is the fastest, most precise and efficient programming language.
    -->>Assembly Manual<<--
    in PDF format, if Ebay removed the link, please search the internet for assembly manual.
    *** Assembly manual is not shipped with kits - must use on-line manual ***
    49 piece kit includes:
    1 - High Quality PC Board
    1 - Attiny261A Atmel Micro-Controller
    1 - LM78L05 Voltage Regulator
    4 - PN2907A Transistors
    1 - 1N914 Diode
    1 - 5K Trimmer Resistor
    2 - Momentary Switches
    20 - LED's Blue
    2 - 220ufd Capacitors
    1 - 100K Resistor
    4 - 4.7K Resistors
    4 - 180 ohm Resistors
    1 - 20 Pin IC Socket
    1 - 6 Pin Programming Header
    4 - PCB Standoffs / Spacers
    1 - 9 vac Wall Transformer
    What you will need to assemble the kit:
    Good quality soldering iron 25 – 40 watt
    Solder tip cleaning sponge
    Rosin core or no clean solder
    Diagonal wire cutter
    What you will need if you would like to program with the kit:
    Computer running Windows XP, Vista, 7 or 8
    ATAVRISP2 Programmer or equivalent
    Atmel® Studio 6 - free download from atmel.com
    Assembly Code
    Here
    in TXT file
    Also available in Red or White, check out my other items.
    Thanks for looking!