-40%
AEOTEC - Heavy Duty Switch, Z-Wave Home Automation
$ 68.58
- Description
- Size Guide
Description
HomeAbout Us
Our Policies
Contact Us
Feedback
Visit Our Store
AEOTEC - Heavy Duty Switch
NOTE
: This device operates at
868.4 mhz
Z-Wave frequency. Please make sure that you have a Z-Wave controller with the same frequency. This frequency (
868.4 mhz) is used in
CEPT countries, Europe, the EU, China, Singapore, South Africa, UAE, Qatar, Singapore
Aeon Labs Heavy Duty Smart Switch is a Z-Wave device that can report the wattage energy usage and KWH usage to a Z-Wave Controller (especially a gateway), it can be controlled by other Z-Wave devices to turn on/off loads, it can bear up to 40A current of resister loads. It also acts as a repeater that forwards Z-Wave command messages to destination nodes if the originating controller is out of range from the destination node.By taking advantage of the Z-Wave mesh network, commands can be routed to their destination via intermediary “listening” Z-Wave products. Products that are Z-Wave certified can be used and communicate with other Z-Wave certified devices.
Technical Specifications
- Operating Frequency: 868.4 mhz
- Waterproof: IP44
- Power Consumption: 1W
- Ratings: 240VAC, 50/60Hz (2Phases L1,L2) ; Max 9600 Watts 40A Resistor; 240VAC 5HP AC Motor
- RF range: 500ft/150m outdoor
- Endurance of 10ms period peak current of 1440A
- Environmental Conditions: Indoor use
- Ambient temperature: 5°C to 40°C
- Max. relative humidity: 80%
- Dimensions (LxWxH): 130 x 120 x 40 mm
Home
|
About Us
|
Our Policies
|
Feedback
|
Contact Us
Copyright © 2017,
Eagle Eye Electronics Store
. All rights reserved.