40amps Smart Pump Switch, Water Heater Timer,Wi-Fi+Remote Control AC 110V 220V

Description

Notice:
1.If your water heater has 2 hot line with 115V for each,can't use;
2.The smart switch must work with mesh router or single 2.4GHz broadcast;
3.This 40amps relay receiver is 433.92MHz, it can be matched with universal remote transmitter which has the same frequency.So you can add more remotes.
The smart switch works effortlessly with Amazon Alexa, Google Assistant and IFTTT to give you hands-free voice control over your devices.
Control Your Home Remotely
The smart switch uses your existing home Wi-Fi network to provide wireless control of lamps, heaters, fans and more - with no subscription or hub required.
Product Specifications:
Voltage: AC85V-250 V,50 / 60 Hz
Load: 250 V / 40 A MAX
Standby Power Consumption: <0.5 W
Working environment: Indoor
Working Temperature: -10℃~45 ℃
Humidity: ≤80% RH
Support: Wifi 2.4 GHz 802.11 b/g/n, 2G / 3G / 4G
Wireless Communication Range: 100 m / 328 ft
Material: V0 flame-retardant material
Dimension: 123 x 61 x 31 mm
Net Weight: 135 g
How to set remote mode:
1.Clean code ,clear all remote control data: Press the remote pairing button 8 times to clean code if you want to reset mode.(if you just want to add more remote, no need to clean code).
2.Setting Toggle Mode: Press pairing button 2 times fast,red LED light on,press the remote control button,red LED flash fast, then off, paring done.
(Press remote control button, the receiver’s relay is ON,press button again,the receiver’s relay is OFF)
3.How to set the wifi mode
Long press the WiFi pairing button 10 seconds,blue LED flash,waiting for app maching.
Notice:This relay module does not support momentary and Latched mode