2 LOW PSI- LONG THROW- COMPLETE COVERAGE 14W IMPACT SPRINKLERS- COMMERCIAL BASE

Description

This combination is for the person that needs longest possible full circle throw but might not have high enough pressure to run our all brass pasture master models.
Winner of this auction will receive 1 deluxe 3/4" No-tip sprinkler base, and 1 new Yuzuak Atom 14W full circle double nozzle wedge drive sprinkler with front nozzle water breaker. The secret to being able to run on lower pressure is the wedge drive on the front of the arm it gives you the ability to turn the sprinkler at lower psi and still get long throw and unsurpassed coverage.
This is a heavy duty, commercial quality, no-tip sprinkler base.  I have sold thousands of these to golf courses, cities, schools, ranches and homeowners over the last 20 years. They love them because the only maintenance that these require is a .49 cent hose washer every couple years. The base is made of steel black pipe that has been powder coated, both the hose end and the sprinkler ends are brass which is so important because it keeps the sprinkler from becoming rusted in.
5/32" drive nozzle x 3/32 front spreader nozzle + free rear nozzle plug
3/4" male inlet
full circle coverage.
beautiful double nozzle coverage
Please bid with confidence. Since 1985, I have rebuilt and tested more brass impact sprinklers than anyone. Our customers have included many of the most prestigious golf courses, college and pro sports stadiums, farms, and ranches in the USA.  Now because of the internet our new and rebuilt sprinklers, as well as repair parts and rebuilding services, are available to everyone. Recently a couple of sellers have popped up on ebay offering rebuilt sprinklers. Please don't assume that all rebuilt sprinklers are rebuilt the same way and are of the same quality.  These other
reconditioners
are using high impact glass bead to clean the brass (like sand blasting); I can tell because back in the 80's I did the same thing( I don't care what they say yellow sprinklers = impact blasting). You end up with a nice looking, shiny brass sprinkler; however, I found that the glass bead removed small amounts of the brass which pitted the nipple and bearing. These pits held dirt, debris, and water deposits which did not allow the sprinkler to self flush, as it was designed to do.  The sprinkler ends up freezing up or grinding down the washers and the bearing. Glass beading not only does not clean the most important part of the sprinkler, the inside, it makes the sprinkler bearing less rebuild-able the next time due to the damage.  I included a picture of brass nipples cleaned using my unique cleaning process that took years to perfect - glass smooth with no brass missing! If you buy a so-called "rebuilt" sprinkler from someone else and this spring you turn it on and, for whatever reason, it doesn't work, will they be there to help you? Do they have the inventory to replace it?
I will. I do. Thanks, Frank