1PC Energy Saving IR Infra-Red Wireless Remote Control Outlet Switch Socket

Description

Build in IR Infra-Red learning system, you can use your existing remote controller for controlling on and off.
Build in 1 universal socket and 2 X US styles socket.
The power plug can change from US styles to Australia Styles.
No Battery required.
The Wireless Remote Controlled Switch Socket is ideal for the remote operation of many electrical devices
Including TV, Radio, Fans, lamps, appliances, tools and more.
Range: It depends on your infra-red remote controller (normal infra-red remote controller around 5 meter)
To clear all programmed buttons:
1) Have the adapter plugged in and turned off.
2) Press the button and hold; the light will come on.
3) Keep holding until the light turns off. The commands should now be cleared.
To program a new button:
1) Plug into an outlet.
2) Press the button on the adapter once to turn on, a red light will come on.
3) Press and hold the button. As soon you press the button the light will immediately turn off, don't let that throw you off, keep holding it.
4) Keep holding until the light turns back on, at that point let the button go.
5) When you let go, then it starts flashing.
6) Press the remote button you want to program; you have a few seconds to do this.
Maximum power consumption 110V-220V 10A , 500W
Size:6.5cm x 4cm x 2cm
Quanity:1PC
How it works:
Before use - Training procedure
1. Press the training Black button on the outlet about 3 second, then it starts for training mode (LED blinking)
2. Using your existing infra-red remote controller such as TV remote, point to the socket sensor and press a button(Any button you like)
3. Completed. The button will recognized, you can press this button again to switch on and o